Differential, Removing and Installing

Note: Removing and installing is also possible with transmission installed in vehicle.





1. Bolt, 10 Nm + 114 turn (90°) further
2. Drive flange
^ When removing, secure with a drift to prevent it turning
3. Bolt, 25 Nm
^ Qty. 10
4. Cover for final drive
^ Removing and installing drive wheel for speedometer sender -G22.
^ If replaced: adjust ring gear
5. Oil filler plug, 40 Nm
^ Checking oil level in transmission
6. Differential
^ Disassembling and assembling
^ If replaced: adjust ring gear
7. Transmission housing
^ Servicing