Central Locking on Board Diagnostic (OBD), Initiating

Central Locking On Board Diagnostic (OBD), Initiating

Requirements
- Power supply and fuses for relevant system OK
- VAG1551 Scan Tool (ST) connected


NOTE:
- If the display remains blank, check VAG1551 voltage supply according to wiring diagram,
- The Scan Tool (ST) HELP button can provide additional operating instruction.
- The -> button is used to advance through the program sequence.
- If an incorrect entry is made, press the -C-button to escape.


- Switch printer on by pressing PRINT button (indicator lamp in button lights up).
- Press button -1- to select "Rapid data transfer" operating mode 1.

Indicated on display


Rapid data transfer HELP
Insert address word XX


Address word for central locking: 35

- Press buttons -3- and -5- to insert "Central Locking" address word 35.

Indicated on display


Rapid data transfer Q
35-Central Locking


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer
Scan Tool sends address word 35

Vehicles From 1998:

After about 5 seconds, display indicates (for example):


8L0862257B CL-Pump, DWA, Func D04 ->
Coding 16140 WSC 06812


All vehicles:

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE: A list of available functions is printed out when the HELP button is pressed.