5 Spd. Automatic Transmission 01V

Diagnostic Trouble Codes 00545 / P0702, 00545 / P1781, 00545 / P1782, 00638 / P0702 and 17086 / P0702 - 5 Spd. Automatic Transmission 01V





1) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note for malfunction recognition of DTC 00545 / P0702 (only malfunction type "harness connector):

^ Condition for malfunction recognition: TCM is not receiving throttle position signal or consumption signal. Detected transmission input speed higher than 2000 RPM.
^ This malfunction can only occur on vehicles without CAN-bus A)

A) There is a difference between vehicles with and without CAN-bus.





1) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note for DTC 00638 / P0702 and 00638 / P1767:

^ This malfunction can only occur for vehicles without CAN-bus A)

A) There is a difference between vehicles with and without CAN-bus.





Note for DTCs 16987 / P0603, 16989 / P0605 and 17086 / P0702:

Only after determining possible malfunction cause and repairing the following malfunctions:

^ mechanical malfunction
^ hydraulic malfunction
^ electrical/electronic components as well as wire connections