5 Spd. Automatic Transmission 01V

Diagnostic Trouble Codes 17095 / P0711 - 5 Spd. Automatic Transmission 01V





1) First check harness connectors for contact corrosion and water ingress, replace if necessary. If there are malfunctions indicated for solenoid valves, pay particular attention to the 16-pin harness connector at transmission between valve body and cable harness.
2) ATF temperature sensor -G93- is integrated in the wiring harness in the transmission (at valve body)
3) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note for DTC 17095 / P0711:

^ Requirement for malfunction recognition: The transmission oil temperature does not increase after starting engine or makes temperature leaps.