5 Spd. Automatic Transmission 01V

Diagnostic Trouble Codes 00300 / P0712, 00300 / P0713 and 17096 / P0712 - 5 Spd. Automatic Transmission 01V





1) This DTC is also stored if the detected ATF temperature is below - 50° C.
2) This DTC is also stored if the detected ATF temperature is above 180° C.
3) First check harness connectors for contact corrosion and water ingress, replace if necessary. If DTCs are indicated, carefully check the 16-pin harness connector at transmission between valve body and cable harness.
4) Pay attention to which hydraulic control the transmission has when selecting measuring value block.





1) First check harness connectors for contact corrosion and water ingress, replace if necessary. If there are malfunctions indicated for solenoid valves, pay particular attention to the 16-pin harness connector at transmission between valve body and cable harness.
2) ATF temperature sensor -G93- is integrated in the wiring harness in the transmission (at valve body)
3) Pay attention to which hydraulic control the transmission has when selecting measuring value block.