5 Spd. Automatic Transmission 01V

Diagnostic Trouble Codes 00260 / P0758 and 17142 / P0758 - 5 Spd. Automatic Transmission 01V





1) One of these indications is also displayed for the applicable component.
2) First check harness connectors for contact corrosion and water ingress, replace if necessary. If there are malfunctions indicated for solenoid valves, pay particular attention to the 16-pin harness connector at transmission between valve body and cable harness.
3) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note for DTC 00260 / P0758:

^ Short circuit to B+ is already checked with ignition switched on. During operation all malfunction types are recognized.





1) First check harness connectors for contact corrosion and water ingress, replace if necessary. If there are malfunctions indicated for solenoid valves, pay particular attention to the 16-pin harness connector at transmission between valve body and cable harness.
2) Pay attention to which hydraulic control the transmission has when selecting measuring value block.