5 Spd. Automatic Transmission 01V

Diagnostic Trouble Codes 18160 / P1752 - 5 Spd. Automatic Transmission 01V





1) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note about DTC 18160 / P1752:

^ Requirement for malfunction recognition: Battery voltage smaller than 9 Volts, transmission does not shift into emergency running mode.
^ When vehicle voltage (terminal 30) fails, application values are lost, i.e. Transmission Control Module (TCM) must learn these values again when vehicle is started. During this renewed "learning", shifting quality may be lower than normal.