5 Spd. Automatic Transmission 01V

Diagnostic Trouble Codes 18264 / P1856 - 5 Spd. Automatic Transmission 01V





1) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note for DTC 18264 / P1856:

^ The signal for Throttle Position (TP) sensor -G69- is transmitted by the EMC via the CAN-BUS wires to the TMC.
^ Requirements for malfunction recognition: Malfunction of the relevant component is recognized by the EMC. This diagnostic is transmitted to the TCM via the CAN-bus wiring.