5 Spd. Automatic Transmission 01V

Diagnostic Trouble Codes 18265 / P1857 - 5 Spd. Automatic Transmission 01V





1) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note for DTC 18265 / P1857:

^ Requirements for malfunction recognition: Malfunction of the relevant component is recognized by the Engine Control Module (ECM). This diagnostic is transmitted to the TCM via the CAN-bus wiring.
^ Requirement for malfunction recognition: No malfunction of the engine RPM and throttle valve signal was recognized, and no load signal was recognized for 245 ms.
^ If a malfunction of the load signal is recognized by the ECM, this malfunction is communicated to the TCM via a transmittal of a duty cycle.