Programming and Relearning
Adaptation (Scan Tool Function 10)
The navigation system uses the speed signal from speedometer (GALA) for calculating mileage.
Using the adaptation function, the following changes can be made and saved.
- Changing tire size
- Changing pulse number per wheel rotation (GALA)
- Locking i.e. switching free production diagnostic
- Connection of related i.e. external speakers
- Changing country selection
Individual functions are called up by entering the appropriate adaptation channel numbers (listed in the adaptation table).
Adaptation table:
Adaptation channel Adaptation function
01 Tire circumference in mm
02 Pulse number per wheel rotation (GALA)
03 Production diagnostic (function status register) locking i.e. switching free
04 Connection of related, i.e. external speakers
05 Country selection
Initiating "Adaptation" function 10
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0-. This selects "Adaptation", function 10.
Indicated on display
Rapid data transfer Q
10 Adaptation
- Confirm input using the -Q- button.
Indicated on display
Adaptation
Insert channel number XX
- Enter desired adaptation channel (adaptation table).
- Confirm input using the -Q- button.
NOTE: After changing an adaptation value or after ending a adaptation channel, function "10 - Adaptation" must be performed again in order to select a different adaptation channel.
Adapting tire circumference
Indicated on display
Adaptation
Insert channel number XX
- Press buttons -0- and -1-. 01 selects "channel 1"
NOTE: Incorrect entries can be corrected by pressing the -C- button.
- Confirm input using the -Q- button.
Indicated on display
Channel 1 Adaptation 1935 ->
<-1 3->
The selected channel and the currently stored tire circumference in mm will be displayed in the line listed above.
- Press -> button.
Indicated on display
Channel 1 Adaptation 1935 ->
Adaptation value XXXXX
- Enter new tire circumference, while doing so
Place a 0 before the 4-digit number (e.g. 01910) Tire table.
- Confirm input using the -Q- button.
Indicated on display
Channel 1 Adaptation 1910 Q
<-1 3->
- Confirm input using the -Q- button.
Indicated on display
Channel 1 Adaptation 1910 Q
Save changed values?
- Confirm input using the -Q- button.
Indicated on display
Channel 1 Adaptation 1910 ->
Changed value is saved
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6-. This selects "End Output", function 06.
- Press -> button.
Adapting pulse number per wheel rotation (GALA)
Indicated on display
Adaptation
Insert channel number XX
- Press buttons -0- and -2-. 02 selects "channel 2"
NOTE: Incorrect entries can be corrected by pressing the -C- button.
- Confirm input using the -Q- button.
Indicated on display
Channel 2 Adaptation 4
<-1 3->
The selected channel and the currently stored impulse number of the ABS wheel speed sensors will be displayed
- Press -> button.
Indicated on display
Channel 2 Adaptation 4 ->
Adaptation value XXXXX
- Enter a new impulse value. Place three 0 before the two digit number (e.g. 00008)
Tire table.
- Confirm input using the -Q- button.
Indicated on display
Channel 2 Adaptation 8 Q
<-1 3->
- Confirm input using the -Q- button.
Indicated on display
Channel 2 Adaptation 8 Q
Store changed value?
- Confirm input using the -Q- button.
Indicated on display
Channel 2 Adaptation 8 ->
Changed value is stored
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6-. This selects "End Output", function 06.
- Press -> button.
Tire table for Audi A4
Adapting production diagnostic (function status register)
Indicated on display
Adaptation
Insert channel number XX
- Press buttons -0- and -3-. 03 selects "channel 3"
NOTE: Incorrect entries can be corrected by pressing the -C- button.
- Confirm input using the -Q- button.
Indicated on display
Channel 3 Adaptation 0 ->
<-1 3->
The selected channel and the condition of the production diagnostic (function status register) is displayed in the upper line (0 = locked, 1 = active).
- Press -> button.
Indicated on display
Channel 3 Adaptation 0 ->
Adaptation value XXXXX
- Enter new adaptation value (i.e.. 00001), where 00000 = product diagnostic locked and 00001 = product diagnostic active.
- Confirm input using the -Q- button.
Indicated on display
Channel 3 Adaptation 1 Q
<-1 3->
- Confirm input using the -Q- button.
Indicated on display
Channel 3 Adaptation 1 Q
Store changed value?
- Confirm input using the -Q- button.
Indicated on display
Channel 3 Adaptation 1 ->
Changed value is stored
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6-. This selects "End Output", function 06.
- Press -> button.
Adapting speaker connection
Indicated on display
Adaptation
Insert channel number XX
- Press buttons -0- and -4-. 04 selects "channel 4"
NOTE: Incorrect entries can be corrected by pressing the -C- button.
- Confirm input using the -Q- button.
Indicated on display
Channel 4 Adaptation 0 ->
<-1 3->
The selected channel and the condition and the type of speaker connection is displayed in the upper line (0 = external radio, 1 = related speaker). If a radio system is installed, front left speakers are used, otherwise a separate speaker (hands-free speaker) is installed.
- Press -> button.
Indicated on display
Channel 4 Adaptation 0 ->
Adaptation value XXXXX
- Enter new adaptation value (e.g. 00001), where 00000 = external radio and 00001 = separate speaker.
- Confirm input using the -Q- button.
Indicated on display
Channel 4 Adaptation 1 Q
<-1 3->
- Confirm input using the -Q- button.
Indicated on display
Channel 4 Adaptation 1 Q
Store changed value?
- Confirm input using the -Q- button.
Indicated on display
Channel 4 Adaptation 1 ->
Changed value is stored
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6-. This selects "End Output", function 06.
- Press -> button.
Adapting country selection
Indicated on display
Adaptation
Insert channel number XX
- Press button s -0- and -5-. 05 selects "channel 5"
NOTE: Incorrect entries can be corrected by pressing the -C- button.
- Confirm input using the -Q- button.
Indicated on display
Channel 5 Adaptation 0 ->
<-1 3->
The selected channel and the country selection is displayed in the upper line (0 = Europe, 1 = USA / Canada).
- Press -> button.
Indicated on display
Channel 5 Adaptation 0 ->
Adaptation value XXXXX
- Enter new adaptation value (e.g. 00001), where 00000 = Europe and 00001 = USA / Canada.
- Confirm input using the -Q- button.
Indicated on display
Channel 5 Adaptation 1 Q
<-1 3->
- Confirm input using the -Q- button.
Indicated on display
Channel 5 Adaptation 1 Q
Store changed value?
- Confirm input using the -Q- button.
Indicated on display
Channel 5 Adaptation 1 ->
Changed value is stored
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6-. This selects "End Output", function 06.
- Press -> button.