Erase DTC Memory (Scan Tool Function 05)

Erase DTC Memory (Scan Tool Function 05)

NOTE: DTC memory can be erased only after it has been checked. If DTC memory cannot be erased, again check DTC memory and repair any malfunctions.

Requirements
- DTC memory checked
- All malfunctions repaired

When DTC memory has been checked:

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display

Rapid data transfer Q
05 - Erase DTC Memory

- Press -Q- button to confirm input.

Indicated on display

Rapid data transfer ->
DTC Memory is erased!

DTC memory is now erased.

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

NOTE:
- This message indicates an error in the test sequence.
- This message indicates an error in the test sequence.
- Adhere exactly to the test sequence: first check DTC memory, repair malfunctions as necessary, then erase DTC memory.