Armrest, Removing and Installing

Armrest, Removing And Installing







1 - Armrest
- Remove parking brake lever trim.
- To remove nut - 7 -, first remove rear ashtray and storage compartment insert.
- Remove nuts - 7 - (3x).
- Remove rear center console with armrest.
- Remove bolt - 5 - (1x).
- Pull armrest - 1 - out of lower support - 4 -.
- Remove bolts - 6 - (3x).
- Remove lower support - 4 - from rear center console - 2 -.
2 - Rear center console
3 - Cutout for armrest
- The armrest cutout - 3 - in center console - 2 - is for retrofitting
- For retrofitting without mark in center console.
4 - Lower support
5 - Bolt(1x)
- 10 Nm (7 ft.lb)







6 - Bolts (3x)
- 3.5 Nm (31 in.lb)
7 - Nuts(3x)
- 10 Nm (7 ft.lb)