5 Spd. Automatic Transmission 01V

Multi-function Transmission Range (TR) switch -F125- - 5 Spd. Automatic Transmission 01V

Location: The multi-function switch -1- is located on left at transmission; Multi-pin connector for multi-function switch -arrow-.





Tiptronic switch -F189-

Installation location: The tiptronic switch is integrated into the conductor strip of the symbol insert in the cover of the shift mechanism.

Note:
This switch is not installed on shift mechanisms without tiptronic function.

The switch consists of 3 hall-effect sensors (-A-, -B-, -C- ), which are activated via a magnet on the lateral gate cover of the gate cover.

A - Sensor for down-shift
B - Sensor for Tiptronic-recognition
C - Sensor for up-shift

- If malfunctions occur, the switch for tiptronic must be checked for interference in Read measuring value block.





In case of problems, first check the magnet at the lateral gate cover -C- of the gate cover is properly attached, replace gate cover, if necessary. Only replace the symbol insert with integrated conductor strip after checking the wires. For vehicles with tiptronic-sport steering wheel, also check the buttons at steering wheel and their wire connections.