Throttle Position Sensor/Switch: Locations

Throttle Position (TP) Sensor -G69- - 5 Spd. Automatic Transmission 01V

Location: integrated in Throttle Valve Control Module -J338- -arrow-.





Kick-down switch -F8-

Engines without E-Gas:

The kick-down switch is integrated in the accelerator cable in the plenum chamber, behind bulkhead -arrow-.

Engines with E-gas:

The kick-down switch is integrated in the throttle position sensor and Sensor 2 for Accelerator Position (-G79-, -G185-).

A learning procedure must be performed for the shift point of the kick down switch for engines with E-gas. If the throttle position sensor (-G79-, -G185-) is removed, exchange the engine control module or disconnect the battery.

Kick-down switch, removing and installing

- To remove and install the kick down switch, the accelerator cable must be removed and installed and then adjusted or the throttle position sensor (38-G79-, -G185-) must be replaced.