Check DTC Memory (Scan Tool Function 02)

Check DTC Memory (Scan Tool Function 02)

NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.

- Switch printer on via the PRINT button (indicator lamp in button lights up).

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -2-. This selects "Check DTC Memory", function 02.

Indicated on display

Rapid data transfer Q
02 - Check DTC Memory

- Confirm input using the -Q- button.

X DTC recognized

The number of stored DTCs are indicated on display.

The stored malfunctions are displayed and printed out one after the other.

- Check printout against DTC table and repair all malfunctions as necessary. Radio, Telephone, Navigation - On Board Diagnostic (OBD)

No DTC recognized ->

If "No DTC recognized!" is displayed, the program will return to "Select function XX" after the -> button is pressed.

Indicated on display

Rapid data transfer HELP
Select function XX

If something else is displayed:
Scan Tool operating instructions

End output (Function 06). End Output (Scan Tool Function 06)
- Switch off ignition and disconnect diagnostic connector.