Transmission Vehicle Speed Sensor (VSS) -G38-, Removing and Installing

Transmission Vehicle Speed Sensor (VSS) -G38-, removing and installing - 5 Spd. Automatic Transmission 01V

Removing

- Remove oil pan.





- Disconnect harness connector from Transmission Vehicle Speed Sensor (VSS) -G38- (arrow).





- Remove Transmission Vehicle Speed Sensor (VSS) -2-.

Installing

- Install and tighten Transmission Vehicle Speed Sensor (VSS) -2- using spacer sleeve -1- (height: 8 mm) to 6 Nm.





- Connect connector at Transmission Vehicle Speed Sensor (VSS) -G38-.
- Install oil pan.
- Fill up ATF.