Planetary Drive "III", Disassembling and Assembling

Planetary drive "III", disassembling and assembling - 5 Spd. A/T 01V Front and All Wheel Drive

Disassembling





- Remove ring gear "III" with shaft - 5 - from planetary carrier "III" - 1 -.
- Remove angle washer - 4 -, axial needle bearing - 3 - and thrust washer - 2 -.

Assembling

CAUTION:
Before assembling, check components of planetary gear "III" for wear and damage.

- Attach the following components onto shaft of planetary carrier "III" - 1 -:

2 - Thrust washer
3 - Axial needle bearing
4 - Angle washer - angled edge points toward axial needle bearing

- Position ring gear "III" with shaft - 5 - on planetary carrier "III" - 1 -.