Important:

Important: - 5 Spd. Automatic Transmission 01V

Note:
^ In the following, all possible malfunctions are listed in ascending order of DTC. These malfunctions can be recognized by the transmission control module -J217-. They are then displayed on the VAS 5051 tester or VAG 1551 scan tool when checking DTC memory content.
^ Starting on the next page is a list of all DTCs with all MIL conditions.
^ The DTC is only printed out in the "Rapid data transfer" operating mode when the printer of the VAG 1551 ST is switched on. Example: DTC 16987 P0603
^ If malfunctions only occur sometimes, or if the DTC memory was not erased after malfunction repair, these malfunctions are displayed as "sporadic malfunctions" for a pre-determined time period. Malfunction recognition of transmission control module.
^ If components are indicated as being faulty during the check of the DTC memory, test the wiring to the components for short and open circuit according to wiring diagram.