Torque Converter, Checking

Torque converter, checking





- Check hub -arrow- of torque converter for wear and corrosion.
- Check whether balance plates are properly seated and threads are undamaged.

If signs of wear and corrosion on torque converter, loosened balance plates or damaged threads are detected:

- Replace torque converter.

Note:
^ If the torque converter clutch is burnt or worn, sand-like material and residues can be found in the ATF filter.





^ If the bolts -arrow- for the attachment of the torque converter to the drive plate protrude only 2 mm, the torque converter can get dented and the torque converter clutch can be damaged. Therefore, only use original bolts.