Cooling System: Locations

Cooling System Components

Notes:
- Always replace seals and gaskets
- Draining and filling cooling system.
- Checking cooling system for leaks.

1. Rear coolant line
2. From heater core
- With bleeder valve
3. To heater core
- With bleeder valve
4. Return hose
5. Filler cap for coolant expansion tank
- Checking
6. Expansion tank
7. Filler hose
8. Thermostat
^ Replacing
^ Starts to open at approximately 87°C (188°F)
^ Fully open at approximately 102°C (215°F)
^ Opening travel approximately 8 mm (0.3 inch)
9. Radiator
10. Bracket for coolant hoses
11. Coolant line
^ From cylinder block to oil cooler
12. Oil cooler
13. Coolant line
14. Coolant line to oil cooler