Timing Belt: Specifications

Toothed Belt, Removing and Installing
Toothed Belt Sprocket To Camshaft 55 Nm (41 ft. lbs.)
Idler Wheel 45 Nm (33 ft. lbs.)
Toothed Belt Tensioning Roller 20 Nm (15 ft. lbs.)
Pulley To Crankshaft 20 Nm (15 ft. lbs.)
Toothed Belt Tensioner 10 Nm (7 ft. lbs.)
Eccentric Wheel 22 Nm (16 ft. lbs.)
Center Bolt To Crankshaft 1) 200 Nm + 180° (148 ft. lbs. + 180°) 2)
Cover To Cylinder Head 10 Nm (7 ft. lbs.)
Viscous Fan Bracket 10 Nm (7 ft. lbs.)

1)Always replace center bolt.
2)Turning in two stages of 90° is also permissible.

Toothed belt, removing from camshaft sprockets
Idler 45 Nm (33 ft. lbs.)
Cover For Cylinder Head 10 Nm (7 ft. lbs.)
Outer Ring Of Fan To Radiator 10 Nm (7 ft. lbs.)
Viscous Fan - Using Torque Wrench 1331 And Open End Wrench 3312 37 Nm (27 ft. lbs.)
Viscous Fan - Using Torque Wrench Without Open End Wrench 3312 70 Nm (52 ft. lbs.)
Outer Ring Of Fan To Radiator 10 Nm (7 ft. lbs.)