With Manufacturer's Scan Tool

Erase DTC Memory (function 05)

Requirement
- DTC memory checked

After successful check of DTC memory:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 Erase DTC Memory


- Press -Q- button to confirm input.

If "DTC Memory is not interrogated" is indicated on display:


Attention!
DTC Memory is not interrogated


NOTE: DTC memory is not erased if the ignition was switched on between the check of DTC memory and the attempt to erase DTC memory.


- Adhere to work sequence exactly (i.e. check DTC memory first).

Indicated on display. DTC memory is erased approx. 5 seconds later.


Rapid data transfer ->
DTC Memory erased


NOTE: Wait 1 minute before checking DTC memory again.


If the display indicates:


System not activation ready


Or the print-out (with the printer switched on) indicates:


1 DTC recognized
00811 3333
System not activation ready


The TCM -J217 was not given time for malfunction recognition.

- Wait 1 minute before checking DTC memory again.
- After checking and erasing DTC memory, conduct road test and then check DTC memory again.
"No DTC recognized" must be indicated.