Vehicle Damage Warnings
CAUTION!
When working on the fuel supply and injection system, carefully observe the following rules of cleanliness
1 Thoroughly clean all connections and the surrounding areas before disconnecting.
2 Place removed parts clean surface and cover them over. Use plastic sheeting or paper. Do not use fluffy rags.
3 Carefully cover or seal opened components if the repair cannot be carried out immediately.
4 Only install clean components (parts):
- Only unpack replacement parts immediately prior to installation.
- Do not use parts that have been stored without packing (e.g. in tool boxes etc.).
5 When the system is open:
- Do not work with compressed air.
- Avoid moving vehicle if possible.