Headlights W/High Intensity Gas Discharge (Hid) Lamps, Assembly

Headlights with High Intensity Gas Discharge (HID) Lamps, assembly

CAUTION: Before beginning repairs on the electrical system:

- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Owner's Manual.

WARNING:
- HIGH VOLTAGE!
- Always disconnect battery Ground (GND) strap prior to servicing any parts of the HID lamp system marked with the yellow "HIGH VOLTAGE!"symbol.
- After disconnecting battery, briefly turn headlights on and off in order discharge any residual voltage.

NOTE:
- After performing any repairs or service that could affect headlight aim, check/adjust aim.
- Headlights with HID lamps are equipped with automatic vertical headlight aim control system.







1 - Headlight housing
- Lense bonded to housing, cannot be replaced separately
2 - Fog light bulb
- H3-12V, 55 W
3 - Parking/side marker light bulb
- 12V, H 6 W
4 - Parking/side marker light bulb holder
5 - High beam bulb
- H7-12V.55W
6 - High beam bulb holder
7 - Cover (small)
8 - Cover (large)
9 - Turn signal bulb holder
10 - Turn signal bulb
- 12V, H21 W
11 - Securing ring (bayonet connection) for HID bulb
12 - HID bulb
- 12V, 35 W