Instrument Cluster (OBD) From VIN 8N_04000; Versions D26 & D03

Code Control Module (Function 07)

This function can be used to code the instrument cluster for the following features:

- Optional equipment
- Export version
- Number of cylinders
- Engine type

NOTE:
- The coding procedure is used to set the appropriate configuration for the on-board computer and check the system according to the equipment installed, the export version, the number of cylinders and the engine type.
- The coding table only gives the coding combinations that are possible for the Audi TT.

Coding procedure

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -7- to select "Code Control Module" function 07.
- Press -Q- button to confirm input

Indicated on display:

Code Control Module
Enter code number XXXXX (0-32000)

- Enter code number according to coding table. Example: 06224

NOTE:
- The coding can also be entered for various combinations of optional equipment, according to what is installed on the vehicle.
- If the vehicle is equipped with more than one item of optional equipment which needs to be coded, enter the sum total of the respective coding numbers.

07 Seatbelt warning (02) plus larger fuel tank (01) and 02M transmission for quattro (04) equals 07
2 USA
4 4 cylinders
4 Turbo engine

Coding table

Coding Table:

Indicated on display (example only):

Code Control Module Q
Enter code number 07244 (0-32000)

- Press -Q- button to confirm input

After about 5 seconds this display will appear

8N1920880 INSTR.+IMM M73 D03 ->
Coding 07244 WSC 06812

- Press" button.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -6- to select "End Output" function 06.