Transmission Housing and Selector Mechanism

Transmission housing and selector mechanism, removing and installing
1. Cone head bolt, 25 Nm
2. Drive flange with spring
3. Torx socket head bolt, 30 Nm
^ For reverse shaft support
^ Self - locking
^ Always replace
4. O-ring
^ Always replace
5. Pivot pin
6. Bolt, 25 Nm
7. Bolt, 25 Nm
8. Cover plate
9. Transmission housing
10. Clutch housing
11. Hexagon bolt, 25 Nm then turn 90° further
12. Selector mechanism
13. Hexagon bolt, 25 Nm