Instrument Panel, Servicing

Instrument Panel, Servicing

Removing air duct







1 - Instrument panel
- Remove switch console
- Remove "side window" defroster vent
2 - Air duct
- Instrument panel removed
- Remove screws - 3 - (3x).
- Remove retaining clips - 4 - (4x).
- Pull air duct - 2 - out of instrument panel - 1 -.
3 - Screws (3x)
- Tightening torque 1.5 Nm
4 - Retaining clips (2x)

Removing and installing dash panel vent

NOTE: Shown from underneath for greater clarity.







- Push vent - A - out of instrument panel covering.

NOTE: Insert instrument panel vent correctly with gear wheels - B - facing downward.







- When installing, guide locating tab - A - into slot - B -.