Cover and Padding For Rear Seat Bench, Removing and Installing

Cover And Padding For Rear Seat Bench, Removing And Installing







1 - Seat cover
- Remove rear seat bench.
- Cut through staples - 4 - on back of seat.
- Remove staples - 3 -.
- Roll back seat cover - 1 -.
- Cut through staples - 4 - on front side of seat and remove seat cover - A -
- Use upholstery stapler V.A.G 1634/to install new staples.
- If cover is new, cut into piping - 5 -.
2 - Padding
3 - Staples
- Normal commercial type, as specified by stapler tool manufacturer
- Only use upholstery stapler.
4 - Staples
5 - Piping