Evaporator Drain Tube: Service and Repair

Evaporator Housing Drain Valve, Removing And Installing


Removing and installing







- Fold back pre-punched flap -D- in insulation mat and remove valve.


NOTE:
- Remove valve -A- downwards from floor. When installing, make sure it is correctly positioned in bulkhead -B-.
- When installed, the valve must not touch flap -D- in insulation mat.
- The valve must not be sprayed with rustproofing wax or undercoating material.
- If customer complaints mention dampness in the passenger compartment, ensure duct -C- is correctly positioned in valve -A-.