Fuel Consumption Display, Adapting

Fuel Consumption Display, Adapting

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -1- and -0- and confirm input with Q button.

Indicated on display:

Adaptation
Enter channel number XX

- Press buttons -0- and -3- to access "channel 03".
- Press -Q- button to confirm input

NOTE:
- Adaptation is only possible on vehicles with on-board computer.
- The value entered must be between 85% and 115%.
- The value must be entered in steps of 5%.
- If the value "100" was changed due to a customer complaint, the changed value must be entered into a new instrument cluster.

Indicated on display:

Channel 3 Adaptation 100 ->
<-1 3->

- Press -> button.

NOTE: The fuel consumption display can only be adapted via direct input.

Indicated on display:

Channel 3 Adaptation 100
Enter adaptation value XXXXX

- Enter required adaptation value via button pad on scan tool, filling in the initial spaces with "O."

Example:

- Required value: 90%
- Entry via button pad: 00090

Indicated on display (example only):

Channel 3 Adaptation 100 Q
Enter adaptation value 00090

- Press -Q- button to confirm input

Indicated on display:

Channel 3 Adaptation 90 Q
Store changed value?

- Press -Q- button to confirm input

Indicated on display:

Channel 3 Adaptation 90 ->
Changed value is stored

- Press -> button to terminate adaptation of fuel consumption display.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -1- and -0- and confirm input with Q button.

NOTE: If an incorrect entry is made the testing unit will switch to function mode.

Indicated on display:

Function is unknown or ->
cannot be carried out at the moment

- Press" button.
- Select adaptation function (function 10) and adaptation channel 03 again.
- Repeat adaptation of fuel consumption display and confirm entry with -Q- button.