With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) Memory, Checking (Function 02)

NOTE: The displayed diagnostic information is not constantly up-dated, but only when starting the On Board Diagnostic (OBD) or with the function 05 "Erase DTC Memory."

- Switch on printer with the Print button (indicator lamp in button lights up).

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -2- to select "Check DTC Memory" function 02.

Indicated on display:

Rapid data transfer Q
02 - Check DTC Memory

- Press -Q- button to confirm input

The number of stored DTCs appears in the display.

X DTCs recognized!

The stored DTCs are displayed and printed out one after the other.

- Check printout against DTC table and repair all malfunctions as necessary.

If "No DTC recognized" is displayed the program will return to the start point after pressing -> button.

No DTC recognized! ->

Indicated on display:

Rapid data transfer HELP
Select function XX

If something else is displayed:

- End Output (function 06). Instrument Cluster (OBD) to VIN 8N_040000 and Version D24
- Switch off ignition and disconnect data link connector.