Cabin Air Filter / Purifier: Service and Repair

Dust And Pollen Filter, Removing And Installing







- Lift air intake plenum cover section -A-.
- Push back tabs -B-.
- Remove dust and pollen filter element from housing.


NOTE:
- To prevent water from running onto dust and pollen filter and into the heating system, the air intake plenum cover and wind deflector must be properly installed.
- Air intake plenum cover section -A- must not contact dust and pollen filter.
- Dust and pollen filter element should be replaced at regular intervals.







- Dust and pollen filter must be re-installed correctly in frame -B-. Arrows -A- marked on frame indicate air flow direction through filter element.