Flywheel: Service and Repair

Dual mass flywheel, removing and installing
Removing
^ Mark installing position of dual mass flywheel on crankshaft with a permanent felt - marker.





^ Insert counter - hold tool 3067 in drilling in cylinder block, and engage on flywheel.
^ Insertion position for counter - hold tool:
- A: to tighten
- B: to loosen
^ Loosen flywheel bolts.

Installing
^ Fit dual mass flywheel to crankshaft in the position marked when removing it.
^ Fit new bolts and tighten.

Tightening torque
^ Flywheel to crankshaft: 60 Nm + additional 90°

Notes: 90° = 1/4 turn additional