Fuse Block: Service and Repair

Fuse Box, Removing And Installing

CAUTION: Before beginning repairs on the electrical system:

- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Owner's Manual.


Removing
- Carefully lever off side cover at left end of dash panel.







- Unscrew two securing bolts -B-, then press retaining catches -C- and at the same time pull out fuse box -A- toward rear of vehicle.

Installing
- Install in reverse order of removal.

NOTE: Always refer to the applicable wiring diagram for identification of connections on fuse box.