Symbols for Working Procedures

Work Procedures Legend

Sanding

- Wear away weld seam with a grinder around material application.





• The weld seams must be sanded so that the panel strength of the exterior panels is not or only slightly weakened.

Set an Edge

- To perform an overlapping weld.

Perforate

- To perform a gas-shielded arc plug weld later.

Drill

- To perform a gas-shielded arc plug weld later or drill out spot welds (original connection).





Sanding





• Removing paint on hard-to-reach areas (e.g. interior roof frame) with brush (VAS 5182).

Cavity Sealant





Adhesives

Fine Seal