Read Measuring Value Block (Function 08)

Test conditions
- Coolant temperature less than 80 °C
- Electrical consumers switched off (radiator fan must NOT run during test).
- A/C switched off.

Test sequence
- Connect VAS5051 vehicle diagnostic, testing and information system or VAG 1551 scan tool and select control module for engine electronics using "address word" 01.
- Engine must run at idle for this.

When indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons "08" for the function "Read Measuring Value Block" and press Q button to confirm input.

When indicated on display


Read Measuring Value Block Q
Input display group number XXX


- Input desired three digit display group number and press Q button to confirm input.


NOTE: Which display group should be chosen depends on current function and component tests.


Indicated on display for display group 000:


Read Measuring Value Block 0 ->
1 2 3 4 5 6 7 8 9 10


Indicated on display (example) for display group 001:


Read Measuring Value Block 1 ->
1 2 3 4


NOTE:
- With printer switched on, current display can be printed out on paper roll.
- To switch to a different display group, proceed as follows: