Trunk / Liftgate Hinge: Service and Repair

Rear Lid Hinge, Removing And Installing

Removing







- Remove cover - 1 - for rear lid hinge and cable guide - 2 - from rear lid hinge - arrows -.







- Remove outer roof frame trim - 1 -, for this purpose lift trim from retaining clips - 2 - after unclipping and guide tabs - arrows - around the hinge.
- Remove D-pillar trim.

NOTE: To prevent damage to paint, support and secure rear lid.







- Remove nuts - arrows -.







- Remove bolts - arrows - at left and right.
- Remove hinge.

Installing
Installation is the reverse of removal, noting the following:
- When installing, tightening torque 21 Nm.
- Adjusting rear lid.