Diagram 333/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Garage Door Opener Control Head, Garage Door Opener Control Module, Fuse





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D - Ignition/Starter Switch

E284 - Garage Door Opener Control Head

J386 - Door control module, driver side Convenience System Overview

J530 - Garage Door Opener Control Module Locations

S16 - Fuse

T6m - 6-Pin Connector, on the Garage Door Opener Control Head

T10e - 10-Pin Connector, on Door control module, driver side

T10i - 10-Pin Connector, blue, connector station A-pillar, left

T10x - 10-Pin Connector, black, near front bumper

T17g - 17-Pin Connector, dark brown, connector station A-pillar, left

T20 - 20-Pin Connector, black, door A-pillar, left

(345) - Ground Connection (in bumper wiring harness)

(A2) - plus connection (15), in instrument panel wiring harness

Previous Diagram 333/2 (Tracks 1-14)