Diagram 10/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module, Ignition Coils with Power Output Stages





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J217 - Transmission Control Module (TCM)

J220 - Motronic Engine Control Module (ECM)

N70 - Ignition Coil 1 with Power Output Stage Locations

N127 - Ignition Coil 2 with Power Output Stage Locations

N291 - Ignition Coil 3 with Power Output Stage Locations

N292 - Ignition Coil 4 with Power Output Stage Locations

P - Spark Plug Connectors

Q - Spark Plugs

T10 - 10-Pin Connector, black, connector station E-box, plenum chamber

T10a - 10-Pin Connector, brown, connector station E-box, plenum chamber

T16 - 16-Pin Connector, black, diagnostic connection

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

(18) - Ground connection, on engine block Component Locations Overview in engine Compartment

(83) - Ground connection -1-, in right front wiring harness

(A76) - Wire connection (K-diagnosis wire), in instrument panel wiring harness

(A121) - Wire connection (High-bus), in instrument panel wiring harness

(A122) - Wire connection (Low-bus), in instrument panel wiring harness

(D23) - Connector (over fuse 229), in wiring harness front, right

* - Automatic transmission (multitronic 01J) only, up to 2003 m. y.

** - Automatic transmission (AG5) only

*** - Automatic transmission (multitronic 01J) only, from 2004 m. y.

^ - CAN-Bus (Data bus)

Previous Diagram 10/10 (Tracks 113-126)

Next Diagram 10/12 (Tracks 141-154)