Without Sunroof Switch

Front Reading/Interior Lights, Removing and Installing

Interior/reading lights without sunroof switch







NOTE:
- To replace the bulb, pry off the lens.
- Bulb for interior light -6-: 72 V, 70 W
- Bulb for reading lights -5-: 72 V, 5 W


Removing

- Carefully pry off lens -1- using flat screwdriver.
- Remove both Phillips-head screws -2-.
- Pry out hooks at -B- using screwdriver and then remove interior/reading light -3- from roof.
- Disconnect harness connector -4-.

Installing

- Connect harness connector -4-.
- Insert interior/reading light -3- at -A-, and clip it in on opposite side at -B-.
- Secure with Phillips-head screws -2- and reinstall lens -1-.