Transmission Vehicle Speed Sensor (VSS) -G38-, Removing and Installing

Transmission Vehicle Speed Sensor (VSS) -G38-, removing and installing
Also referred to as Sender for transmission output RPM -G195-.

Removing
^ Removing oil pan.





^ Disconnect harness connector from Transmission Vehicle Speed Sensor (VSS) -G38- (arrow).





^ Remove Transmission Vehicle Speed Sensor (VSS) -2-.

Installing





^ Install and tighten Transmission Vehicle Speed Sensor (VSS) -2- using spacer sleeve -1- (height: 8 mm) to 6 Nm.





^ Connect connector at Transmission Vehicle Speed Sensor (VSS) -G38-.
^ Installing oil pan.
^ Fill up ATF.