Headlamp Alignment Control Module: Locations

Headlight Automatic Vertical Aim Control, Overview


CAUTION!
Disconnect the battery Ground (GND) strap before working on the electrical system


NOTE:
- Before disconnecting the battery, determine the correct coding for the anti-theft radio.
- After reconnecting the battery, check and activate the vehicle's electrical equipment (radio, clock, comfort and convenience features, etc.).







1 - Xenon headlights with headlight beam adjusting motors -V48-/-V49-
- Removing and installing Xenon headlights
- Removing and installing headlight beam adjusting motor for automatic headlight aim control
2 - Left front level control system sensor -G78-
- On front axle, left lower track control link
3 - Left rear level control system sensor -G76- (all wheel drive)
- At left rear suspension link
4 - Left rear level control system sensor -G76- (front wheel drive)
- On rear axle
5 - Automatic vertical aim control system control module -J431-
- Under rightrear seat bench