Assembly Overview

Assembly Overview







1 - Rear window
- When installing, note direction of joint - arrow - in magnified area of illustration.
- After inserting window, pull up to dimension - a - = 6.5 mm at roof.
- Align window at sides.
2 - Adhesive end profile
- Adhere next to vertical rear window defrosting strips
- Adhesive must not touch distributing wire for rear window defroster.
3 - Adhesive bead
- Note varying spacing dimensions to window edge.
- The dimensions - b - and - c - are achieved when you allow the application nozzle to touch each inner edge of the molding.
- The distance to lower window edge dimension - d - is 15 mm.
- Bead cross section
- Bead width = 8 ± 2 mm
- Bead height = 13.5 ± 1.5 mm
4 - Spacers
- Note different heights for standard glass and tinted glass.
- Place spacers at distance of 3 mm to lower window edge onto markings applied in ceramic screen printed area.