4-Way Relay Carrier, Removing and Installing

4-Way Relay Carrier, Removing And Installing

Removing
- Remove driver's storage compartment:







- Remove bolts -1- of fuse box -2-.
- Detach fuse box from center tube for instrument panel.
- Detach wiring harness on center tube for instrument panel and move clear.
- Pull relays or control modules from 4-way relay carrier.







- Mark cables at screw connections -2-, -3- and -5-.
- Detach cables from screw connections.
- Remove screw -1- and nut -4-.
- Unclip fuse carrier on 4-way relay carrier.
- Pull out relays and control modules; then unclip appropriate relay carrier

NOTE:







Precise location of 4-way relay carrier-should be taken from appropriate wiring diagram.


Installing
Install in reverse order, paying attention to the following:







- Attach cables to screw connections -2-, -3- and -5- according to markings.