Right Combination Valve; Air Injection, Removing and Installing

Right combination valve for secondary air injection, removing and installing
Removing





^ Remove rear engine cover (arrows).





^ Remove cover -1- in engine compartment (right side).





^ Remove bolts for holding plate -3- for solenoid valves (arrows).
^ Disconnect intake air hose -1- at Mass Air Flow (MAF) sensor.
^ Disconnect hose -4- for crankcase ventilation from air guide -2-.





^ Remove bolt (arrow) and disconnect air guide -2- at throttle valve control module.
^ Disconnect hose -1- from air guide.

Note: Illustration shows the air guide from rear with the engine removed.





^ Unscrew bolts -1- and -2- and remove combination valve. - Disconnect vacuum hose (arrow).

Installing
Installation is reverse of removal:

Note: Replace gaskets and O-rings.





Tightening torques