Shift Solenoid Position Sensor/Switch: Testing and Inspection

5 Speed Automatic 01V

Electrical/Electronic Components And Locations

Tiptronic switch -F189-






NOTE: This switch is not installed on shift mechanisms without tiptronic function.

- If malfunctions occur, the switch for tiptronic must be checked for interference in Read measuring value block and during the electrical test.






In case of problems, first check the magnet at the lateral gate cover -C- of the gate cover is properly attached, replace gate cover, if necessary. Only replace the symbol insert with integrated conductor strip after checking the wires. For vehicles with tiptronic-sport steering wheel, also check the buttons at steering wheel and their wire connections.