Programming and Relearning
Adaptation (function 10)
The navigation system uses the speed signal from speedometer (GALA) for calculating mileage.
Using the adaptation function, the following changes can be made and saved.
- Changing tire size
- Changing pulse number per wheel rotation (GALA)
- Locking i.e. switching free production diagnostic
- Connection of own i.e. external speakers
- Changing country selection
Individual functions are called up by entering the appropriate adaptation channel numbers (listed in the adaptation table).
Adaptation table:
Initiating "Adaptation" Function 10
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0-. This selects "Adaptation", function 10.
Indicated on display:
Rapid data transfer Q
10 Adaptation
- Press -Q- button to confirm input.
Indicated on display:
Adaptation
Insert channel number XX
- Enter desired adaptation channel (adaptation table).
- Press -Q- button to confirm input.
Note: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.
Adapting Production Diagnostic (function Status Register)
Indicated on display
Adaptation
Insert channel number XX
- Press buttons -0- and -3-. (03 selects "channel 3")
NOTE: An erroneous entry can be corrected by pressing button -C-.
- Press -Q- button to confirm input.
Indicated on display
Channel 3 Adaptation 0 ->
<-1 3->
The selected channel and the condition of the production diagnostic (function status register) Is displayed in the upper line (0 = locked, 1 = active).
- Press -> button.
Indicated on display
Channel 3 Adaptation 0 ->
Insert adaptation value XXXXX
- Enter new adaptation value (e.g. 00001), where 00000 = product diagnostic locked and 00001 = product diagnostic active.
- Press -Q- button to confirm input.
Indicated on display
Channel 3 Adaptation 1 Q
<-1 3->
- Press -Q- button to confirm input.
Indicated on display
Channel 3 Adaptation 1 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 3 Adaptation 1 Q
Changed value is stored
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6-. This selects "End Output", function 06.
- Press -> button.