Adaptation (Function 10)

Adaptation (function 10)
Antenna diagnosis can be activated using the Adaptational function.
Adaptation table:

Perform Function "10 - Adaptation"

Display:
^ Press Buttons 1 and 0 (10 selects the ("Adaptation" function).

Display:
^ Confirm entry using the Q button.

Display:
^ Enter required Adaptation channel 17.
^ Confirm entry using the Q button.

Display
^ Press the (arrow) button.

Display
^ Keyboard entry: 0001

Display
^ Confirm entry using the Q button.

Display
^ Press the (arrow) button.
The following must now be displayed in Channel 17:

Display
^ Press the (arrow) button.
The following must now be displayed in measured value block 021:

Display:
When antenna diagnosis is completed:

Display
^ Press the (arrow) button.
^ Read out the DTC memory
^ Press Buttons 0 and 6 (06 selects the "End Output" function)

Display: