Oil Pump: Specifications
Oil pump to cylinder block
Nuts 20 + 120° Nm 1)2)
Bolts 22 Nm 3)
Gear for differential gear shaft drive to oil pump 20 + 90° Nm 3)4)
Front baffle plate to oil pan (upper part) 10 Nm
Oil pressure line to oil pan (upper part) 10 Nm
Sealing plug in cylinder block 25 Nm
1) 120° correspond to 1/3 rotation
2) Insert nuts using locking fluid; Locking fluid
Refer to Parts Supplier
3) Replace bolts
4) 90° corresponds to 1/4 rotation
Chain tensioner to front sealing flange 12 Nm