Code Control Module (Function 07)

Code Control Module

This function is used to code the radio for the following:
- Radio configuration
- Sound system
- Number of passive loudspeakers
- Country identification


NOTE:
- The coding procedure is used to set the various radio configuration options.
- The coding table only gives the combinations that are available for the Audi A6.
- The term "antenna with remote power supply" refers to active antennas (e.g. rear window antennas) which are powered via the HF cable.


Coding procedure

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -7- to select "Code Control Module" function 07.

Indicated on display


Rapid data transfer Q
07 - Code Control Module


- Press -Q- button to confirm input.

Indicated on display


Code Control Module Q
Input code number XXXXX 06812


- Input code number per coding table.

Coding: 00117 (example)
- Country identification: 0 = standard
- Sound coordination: 0 = standard
- Number of passive loudspeakers: 1 = 1 passive loud speaker, front left (Bose with telephone)
- Sound system: 1 = BOSE sound system
- Radio configuration: 7 = radio system with CD changer unit and secondary display

Indicated on display (the control module identification and the coding that was input, 00117)


4B035186 Radio D0002 ->
Coding 00117 WSC 06812


- Press -> button to end coding.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -6- to select "End Output" function 06.

Indicated on display


Rapid data transfer Q
06 - End


- Press -Q- button to confirm input.

Radio coding table